Table of Contents

STM32F030C8T6: Pinout, Specifications, Models and Datasheet

AI-enhanced STM32F030C8T6 product photograph on a white background
Reviewed by ApexPublished
STM32F030C8T6 product photograph showing chip markings and LQFP48 leadsSTM32F030C8T6 product photograph

STMicroelectronics · Arm Cortex-M0

STM32F030C8T6

32-bit microcontroller · LQFP48

CPU frequency
48 MHz
Flash / SRAM
64 KB / 8 KB
Supply voltage
2.4–3.6 V
Temperature
−40 to +85°C

View Product & Request a Quote →

Contact Apex for pricing and availability.

STM32F030C8T6 Product Information

View STM32F030C8T6 product information and request a quote at Apex

Arm Cortex-M0 · 48 MHz · 64 KB Flash · 8 KB SRAM · LQFP48

This article brings together the device description, pinout, CAD resources, features, related parts, applications and package details for the STM32F030C8T6. Use the complete ordering code when requesting a quotation.

Video: Getting Started with STM32CubeIDE

Watch the STM32CubeIDE introduction on YouTube

Video by DigiKey / Shawn Hymel. It introduces the STM32 development workflow using a Nucleo-F042KS board; it is not an STM32F030C8T6-specific wiring tutorial. Select the correct MCU and board connections when applying the workflow. DigiKey’s STM32CubeIDE getting-started tutorial

STM32F030C8T6 Description

The STM32F030C8T6 is a 32-bit microcontroller from STMicroelectronics’ STM32F0 value line. Its Cortex-M0 processor runs at up to 48 MHz. The C8 device provides 64 KB of Flash and 8 KB of SRAM, rather than the larger memory capacities offered by other members of the STM32F030 family. STMicroelectronics STM32F030C8 product overview · STM32F030 device comparison — datasheet Table 2 (PDF)

It combines program storage, working memory and peripherals in one package for embedded control tasks. For a new design, begin with a pin allocation and a firmware memory budget. For an existing board, compare the complete ordering code with the approved BOM before purchasing.

STM32F030C8T6 Pinout

STM32F030C8T6 LQFP48 top-view pinout with all 48 pin numbers

Pinout redrawn from ST DS9773 Rev 5, Figure 6. Primary names are shown; consult the alternate-function tables for peripheral routing.

The drawing is a top view. Pin 1 is VDD. Pay particular attention to PF6 and PF7 at pins 35 and 36: the STM32F030CC package uses supply pins at these positions. Do not use the CC drawing for the C8 device. STM32F030C8 LQFP48 pinout — page 26 (PDF)

Check each schematic net against the numbered PCB pad before layout approval. Reserve programming access early. ST’s hardware guide covers supply connections, clock circuitry, reset, boot selection and SWD implementation. AN4325: STM32F030 hardware development guide (PDF)

STM32F030C8T6 CAD Model

Symbol

STM32F030C8T6 logical symbol reference with numbered pin names

Logical symbol reference. This is an article illustration, not an importable EDA library.

Footprint

LQFP48 footprint reference with 0.50 mm pitch

Footprint reference based on ST’s recommended land pattern. Validate the native library against the mechanical drawing before manufacturing.

3D model

Illustrative LQFP48 package model preview

Illustrative package view, not a photograph or a dimensioned CAD file.

Get symbols, footprints and 3D models through ST’s CAD Resources section

ST provides access to Ultra Librarian and SamacSys resources. Select the exact STM32F030C8T6 ordering code and the format supported by your CAD software. Compare pin numbering, orientation and land-pattern dimensions before accepting a downloaded model. STM32F030C8 CAD resources from ST

STM32F030C8T6 Features

  • Cortex-M0 processor for 32-bit embedded control.
  • CRC calculation and five-channel DMA.
  • Sleep, Stop and Standby modes.
  • Real-time clock and watchdog functions.
  • Serial wire debug interface.
  • Timer and PWM functions for control and timing tasks.

These functions support compact control designs, but the application still needs a verified pin map and timing budget. STM32F030C8 features on ST’s product page

STM32F030C8T6 Specifications

ParameterValue
ManufacturerSTMicroelectronics
Core / maximum frequencyArm Cortex-M0 / 48 MHz
Flash / SRAM64 KB / 8 KB
GPIO countUp to 39
ADC12-bit; 10 external channels
Serial interfaces2 SPI, 2 I²C, 2 USART
Operating supply2.4–3.6 V
Ambient temperature−40 to +85°C
Mounting / packageSurface mount / LQFP48
Standard packingTray

Sources: STM32F030 device specifications — Table 2 (PDF), STM32F030C8T6 ordering details at ST. Peripheral signals share pins; the table does not imply every function can be routed simultaneously. Confirm electrical conditions for the intended operating mode.

Parts with Similar Specifications

PartFlash / SRAMPackageMain comparison point
STM32F030C6T632 KB / 4 KBLQFP48Lower memory and fewer serial peripherals
STM32F030R8T664 KB / 8 KBLQFP64More pins; a different footprint
STM32F030CCT6256 KB / 32 KBLQFP48More memory, but different supply-pin allocation

These are related family devices, not approved drop-in replacements. Compare pin functions, memory, peripheral requirements and firmware before substitution. STM32F030 family comparison — Table 2 (PDF)

Parts Including “STM32F030C8T6”

Full ordering codePackingRelationship
STM32F030C8T6TrayBase orderable part
STM32F030C8T6TRTape and reelReel-packing option

Both ordering codes appear on ST’s product page. Match the packing option to the assembly process and confirm the supplied quantity and labeling in the quotation. STM32F030C8 ordering codes and packing options

STM32F030C8T6 Applications

ST identifies control interfaces, handheld equipment, peripheral devices, alarms and HVAC equipment among the STM32F030 family’s application areas. STM32F030C8 application overview from ST

For the C8 device, evaluate these examples against the actual memory and pin budget:

ApplicationWhat to verify
Appliance control panelButton inputs, indicators, firmware size and fault response
Sensor interfaceSignal conditioning, sampling needs and communication timing
Alarm controllerInput monitoring, watchdog behavior and recovery testing
HVAC control moduleInterface allocation, environment and control-loop timing

These are design evaluation examples, not application certifications or promises that a complete system meets a particular standard.

STM32F030C8T6 Packaging Information

ItemDetail
Package48-lead LQFP
Nominal body7 × 7 mm
Nominal body thickness1.4 mm
Lead pitch0.50 mm
Nominal overall lead span9 × 9 mm

The body size excludes the leads. Use the full mechanical tolerances and recommended footprint for board design. LQFP48 package dimensions — pages 79–80 (PDF)

For assembly planning, confirm whether the purchase is tray or reel packed, along with the supplier’s handling and storage documentation. Do not infer shipment quantity from the package name.

STM32F030C8T6 Manufacturer

STMicroelectronics manufactures this device and supplies its datasheet, hardware guidance and development resources. The exact-part store listing identifies the device as industrial grade. STMicroelectronics STM32F030C8T6 product listing

For procurement, keep the manufacturer name, full part number, required quantity and traceability requirements together in the RFQ. Confirm price and delivery in the quotation rather than treating this article as a live inventory record.

STM32F030C8T6 Datasheet PDF

STM32F030C8T6 datasheet — DS9773 Rev 5 (PDF)

The shared document covers STM32F030x4/x6/x8/xC devices. Read the C8 device column and the x4/x6/x8 LQFP48 pinout when checking this part. Keep the reviewed document revision with the project records.

For hardware implementation, also consult AN4325: STM32F030 hardware development guide (PDF). Read the applicable device errata before freezing a production design.